8 Commissioning
8.1
Initial commissioning (or after an update)
1. Switch the VM Diematic Evolution housing on using the on/off switch.
The Select country and language used for translation parameter
appears.
2. Select Select country and Select language and confirm.
The two settings have been saved and Enable or disable daylight
saving time appears.
3. Select Off or On and confirm.
Configure the date and time used by the appliance appears.
4. Select and confirm, Year, Month, Day, Hour and Minute.
The main screen appears.
8.2
Accessing the Installer level
Certain parameters, which may affect the operation of the appliance, are
protected by an access code. Only the installer is authorised to modify
these parameters.
To access the installer level:
1. Select the
Off
icon.
2. Enter the code 0012.
The Installer level is activated
On
. After modifying the desired
settings, exit the Installer level.
3. To exit the Installer level, select the
On
icon, then Confirm.
If no actions are taken for 30 minutes, the system will automatically exit
the Installer level.
8.3
Room temperature for a zone
8.3.1
Selecting the operating mode
To set the room temperature for the different living zones, you can choose
between five operating modes:
1. Select the icon for the affected zone,
, for example.
2. Select the desired operating mode:
Tab.23
Mode
Description
Scheduling
Selection of a timer programme
Manual
The room temperature is constant
Short temperature change
The room temperature is forced for a defined period
Holiday
The room temperature is reduced during an absence period to save energy
Antifrost
The installation and equipment are protected during the winter period
8.3.2
Changing the temperature settings of a zone
You can change the temperature settings of activities for the zone
selected.
1. Select the icon for the zone to be modified;
, for example.
2. Select Set Cooling Activity Temperatures.
3. Select the activity to change its temperature setting.
Off
Off
8 Commissioning
32
7703592 - v02 - 14062018
