Dedicated Micros ©2007
Anal
ogue t
o IP Enc
oder
Controlling a telemetry camera
Using DS2KBD
IP Cameras can be controlled using the DS2 Keyboard as well as via NetVu ObserVer.
Note:
The DS2 must be running a version of software with IP camera support enabled.
Setting up DSKSBD control on the OSD
On the Camera Setup page, ensure Telemetry is set to ‘DM-IP’.
Setting up DSKSBD control on the �e� Interface
n the �e� Interface
On the Camera and Record Setup page, ensure Telemetry for the camera is set to ‘DM-IP’.
8.2
Using NetVu ObserVer
Standard telemetry commands for controlling PTZ, recalling presets and tours can be accessed
using the NetVu ObserVer control panel. Access to the dome’s on-screen menus is available using
raw commands. Enable raw commands in NetVu ObserVer (Tools->Options->Appearance->’Show
Button to Enter Raw Telemetry Commands?’ - Refer to NetVu ObserVer documentation for more
information.)
To show the menu, enable Raw Commands and typre *810000.
Navigate using the Pan and Tilt commands
Recall preset 1 to enter.
8.3
