Dedicated Micros DM/ICE-HYPER-D, Руководство пользователя

Страница: 6 / 16

Dedicated Micros ©2007
HyperDome Camer
as
Installation
The ICE dome camera can be mounted in two ways: ceiling mount for installation into a tile ceiling;
surface mount for installation directly to a hard surface or mounting structure.
Parts Supplied
• 2 x Plastic anchors
• 2 x 80 mm (3”) screws
Parts Not Supplied
• Optional video service lead (part number DM/ICED-SERV)
Surface Mount Ceiling Mount
Installing your camera
The ICE fixed dome camera is available in two versions: the ceiling mount version for installation
into a ceiling tile of up to 1.5” (38 mm) thickness; and the surface mount version for installation
directly onto a hard surface or mounting structure.
1 Follow the instructions in the Ceiling Mount Models or Surface Mount Models
section below to mount the camera.
2 Optionally attach a local monitor to the test point using an ICED SERV service
connector (available separately) to assist in setting up the camera.
3 Set the video mode to PAL or NTSC as follows:
During normal camera operation, hold down button B for approximately 0.5
seconds to switch between PAL and NTSC.
4 Aim the camera at the centre of the required scene.
The camera assembly is adjustable in all three axes. Rotate the inner wheel to
adjust the orientation of the picture.
5 Adjust the field of view and focus.
Use the levers on the lens to adjust the camera’s field of view, and focus.
6 Adjust the camera settings for your application. The default camera settings are
suitable for use in most environments.
Optionally, adjust the camera for different lighting conditions and to cater for
movement in the scene. The camera can also be adjusted for image stability during
video switching.
7 Reattach the shim, camera liner and dome cover.