dedalo TRES TREMOLO, Быстрый старт, Страница: 4 / 9

Controls
• f: FADE mode. In this mode the LFO stops and the output level is controlled by
the Control switch between full level (switch released) and silence (switch pressed).
This allows to do the tremolo effect with foot movements, or make fade in and fade
out effects (like for example backwards guitar sounds). The fading time is set by the
controls f IN and f OUT. When the KILL mode is active, the switching between levels
is made with no transition time for a Kill Switch effect. For optimum performance,
position the knob to the center of the desired value.
04 - SYM / f OUT
Symmetry of the waveform. Turn to the right to increase the rise
time, and to the left to increase the fall time. In the center, the rise and fall times
are equal. In PULSE mode, it controls the duration of the second pulse. Turn to the
right for longer duration. In FADE mode, it controls the fade out duration. Turn to
the right for faster times.
05 - RATE / f IN
Oscillation speed of effect. In FADE mode, it controls the fade in
duration. Turn to the right for faster times.
06 - OUTPUT
Effect input, connect your instrument here.
07 - INPUT
Effect output, connect your amplifier here.
08 - DC 9V
Power supply input, connect your dc adapter here.
09 - LED
Lights up when the effect is engaged.
Controls
10 - TRUE BYPASS
Turns on/off the effect. The true bypass switch allows your
sound to remain intact when the effect is off. Besides, the LFO is synchronized to
the start of the cycle each time the pedal is activated by this switch (
Bypass Sync ).
11 - CONTROL
Optical switch for the functions:
• Tap Tempo: Controls the effect speed by means of taping in the switch. To use
it, simply tap on the switch between three and sixteen times, at the desired speed.
The resulting tempo is the average between the taps, and will remain until a new
tempo is set by either tapping or turning the Rate knob.
• Tap Sync: If you make a single tap on this switch, the LFO gets synchronized to
the beginning of the cycle. This function is only active when the rate was previously
set by the Tap Tempo
• Foot-Speed: Modifies the speed of oscillation of the effect. The rate will rise
gradually to its maximum speed while the switch is pressed, returning to the speed
indicated by the RATE control (or set by Tap Tempo) when it is released.
• Fade: In FADE mode this switch controls the output level, doing the tremolo and
fade effects by movements of the foot.
12 - LED
Speed and mode change indicator. When changing modes, the LED will
blink indicating the change.