DEDAKJ DE-1LW, Руководство пользователя

Страница: 15 / 17

14
If it still does not work as you have followed the solutions listed above,
do not disassemble the machine. Please consult the manufacturer for
assistance.
Cleaning water tank
To keep the water tank clean, the water used should be pure water,
distilled water or cold boiled water. we suggest to change water every day.
The water tank should be cleaned every week. First use mild detergent
and shake the tank to wash. Then use clean water to rinse it,
After cleaned the water tank, please remember to put water tank plastic
plug back to avoid leakage of oxygen from the water inlet, caused no
oxygen output from oxygen outlet mouth when the machine is in normal
working.
Air filter cleaning and replacement
The white air filter at the back of the machine can reduce noise, isolate
dust and purify the air. It should be cleaned around every ten days. First
use mild detergent to wash, and then rinse it with clean water. Pay special
attention that it must be dry to be positioned back, or the function of the
molecular sieve could be damaged, which will lead to decreased oxygen
concentration.
Cleaning oxygen Inhaler and atomizing components
Oxygen inhaler should be cleaned after use, and the nasal suction head
on the nasal inhaler should be cleaned and disinfected after use.
Soaking the inhaler in the solution of 5% potassium ferric acid for 5
minutes, cleaning with water, or wiped with alcohol. Oxygen tube as
consumable should be replaced regularly.
Fuse Replacement
After confirmed the power cord plug is out of power suppler outlet,using a
slotted screwdriver to pry off the fuse holder cap, take out the defective
glass fuse tube ,replace new one, put the cap back and tighten it.
NO.
6
Phenomenon Cause analysis Solution
After startup, the
in dicator light works,
but the machine does
not(the sound is
irregular).
Compressor malfunction.
The temperature is so high
that the self protection mode
of the oilfree compressor is
activated.
Separation valve mulfunction
The inner conection tube of
the machine is disconnected
or broken.
Disconnect the power cord and
contact professionals to repair
it.
lt is a normal case.When the
temperature lowers down, the
machine will restart automati-
cally.
Disconnect the power cord and
contact professionals to repair
it.
Disconnect the power cord and
contact professionals to repair
it.