background image

2

lightning flash with arrowhead, within

an equilateral triangle, is intended to

alert the user to the presence of unin-

stalled “dangerous voltage” within the

product’s enclosure that may be of risk

of electric shock to persons.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and mainte-

nance (servicing) instructions in the

literature accompanying the appli-

ance.

AVIS 

RISQUÉ DE CHOC ELECTRIC-NE PASOUVRIR.

WARNING- TO REDUCE RISK

OF FIRE OR ELECTRICAL

SHOCK, DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR

MOISTURE.

NO USER-SERVICEABLE PARTS

INSIDE.  REFER SERVICING TO

QUALIFIED PERSONNEL.

To prevent the risk of electrical shock, do not remove

cover or bottom.  No user serviceable parts inside.

IMPORTANT SAFETY

INSTRUCTIONS!

PLEASE READ THEM BEFORE

OPERATING THIS EQUIPMENT.

1  Read these instructions.

2  Keep these instructions.

3 Heed 

all 

warnings.

4 Follow 

all 

instructions.

5  Do not use this apparatus near water.

6  Clean only with a dry cloth.

7  Do not set things on top of apparatus.

8  Install in accordance with manufactur-

ers instructions.

9  Do not install near any heat sources

such as radiators, heat registers,

stoves, or other apparatus (including

amplifiers) that produce heat.

10  Do not defeat the safety purpose of the

polarized or grounding-type plug. A po-

larized plug has to blades with one

wider then the other. A grounding type

plug has to blades and a third ground-

ing prong.  The wide blade or the third

grounding prong are provided for your

safety.  If the provided plug does not

fit into your outlet, consult an electri-

cian for replacement of the obsolete

outlet.

11  Protect the power cord from being walked

on or pinched particularly at plugs, conve-

nience receptacles, and the point where

they exit from the apparatus.

12  Only use attachments/accessories specified

by the manufacturer.

13  Do not attempt to move this apparatus until

after it has been turned of and cooled down

to room temperature.

14  Unplug this apparatus during lighting storms

or when unused for long periods of time.

15  Refer all servicing ot  qualified service per-

sonnel.  Servicing is required when the ap-

paratus has been damaged in any way, such

as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been

exposed to rain or moisture, does not oper-

ate normally, or has been dropped.

16  Do not expose this equipment to dripping or

splashing and ensure that no objects filled

with liquid, such as vases, are placed on or

near the equipment.

17  To completely disconnect this equipment

from the A.C. mains, disconnect the power

supply cord from the A.C. receptacle.

18  The mains plug of the power supply cord

shall remain readily operable.

19  Never touch a vacuum tube while it is oper-

ating.  Some can reach temperatures of al-

most 400 degrees F.

20  Turn apparatus off when not in use.

Содержание CSP2











Отзывы: