DECRYPTUM PR 2080TI/12 4U. USER MANUAL
10
STARTING UP THE DEVICE
3.
Try to re-plug the motherboard — GPU connecting cable (see
Pic. 6-7). The number on the cable and on the card corresponds
to the number displayed in the BIOS diagnostic message.
Re-plug the GPU riser. Do it after carefully removing the protec-
tive adhesive tape from the Pci-e connector.
Check the condition of the riser/GPU power cables.
Disconnect the main unit and reconnect power.
If none of the abovementioned steps help, contact your Comino
representative for troubleshooting.
After each of the above mentioned steps, connect the com-
puting unit to the electrical grid and try to switch it on.
3.4.1
3.4.2
3.4.3
3.4.4
3.4.5
IT IS STRONGLY FORBIDDEN TO START REPAIRING
A DEVICE WHICH IS CONNECTED TO ELECTRICAL GRID.
DANGER
THE LIST OF ACTIONS IN CASE OF GPU FAILURE
!
Pic.8
Pic.9
