4
DS Rev. 3 09/2016
Installation
B
20
21
22
C
A. Shut off water supply at the valves.
Remove old faucet and clean the
mounting surface for installation of new
faucet.
E. Turn on water supply to check for
leaks at all connection. Remove spray
head from the pull out hose and let the
water run for about 1 minute and check
for leaks. Reattach the spray head.
D1. Apply Teflon (TPFE) tape on the
shut off valves. Thread the tape in
counter-clockwise direction.
D2. Use Wrench to tighten the water
supply hoses, please do not overtighten
the connections.
B. Insert the hoses and shank through
the hole. The faucet hole on the mount
-
ing surface should be 1 1/2” in diameter.
C. From under the sink, install the steel
washer (21), and nut (22) onto the
shank (20) Tighten the nut to secure the
faucet to the mounting surface.
D1
Flexible water supply line
D2
E
01. Temperature Indicator
02. Screw
03. Handle
04. Cap
05. Bonnet
06. Cartridge
07. Seat
08. Sprayer
09. Sprayer Holder
10. Hose
11. Spring
12. Swing Arm
13. Neck
14. O-ring
15. Locking Ring
16. Ring
17. Body
18. Flange
19. EVA Washer
20. Shank
21. Steel Washer
22. Mounting Nut
23. Supply Hose
24. Check Valve
25. Rubber Gasket
A
01
08
09
10
24
25
11
12
13
14
15
16
17
18
19
20
21
22
23
02
03
04
05
06
07
