Decor Star PL-005-SS Скачать руководство пользователя страница 3

Decor Star

PL-005-SS 

Rev. A3 122015

3

Attention

• 

This installation guide is subject to change without notice, please contact us to request the most 
updated version of this installation guide.

• 

This is a general installation guideline, actual installation may vary. Consult a professional if 
necessary.

• 

Product drawings in this installation guide is for illustration purpose only. Actual product may vary 
depends on model.

• 

Always take extra precautions and wear appropriate safety equipment when installing this product.

• 

Proper water pressure needs to be maintained to prevent possible scalding.

• 

Stainless steel shower panels are handmade and assembled. Product dimensions may vary 
slightly, always measure the actual product before installation.

You may also need the following tools

1. Thread Sealant Tape, (PTFE Tape)

5. Pencil or Marker

2. Silicon Sealant

6. Level

3. Phillips Screw Driver

7. Hammer

4. Drill with ¼” Drill bit

Before You Begin

• 

Read and understand this instructions completely before installation.

• 

Unpack and inspect the shower panel from the package for shipping damage and make sure all 
parts are included with the shower panel.

• 

Keep the product in its package until you are ready to install.

• 

Read and understand this installation guide completely.

• 

Make sure the installation site is clean and free of dust and debris.

• 

Please make sure the water supply is shut off to the installation area. If necessary, shut off the 
water to the entire house.

• 

Turn on the water at a bathroom faucet in the house to relieve the pressure in the plumbing 
system.

Rough-In

• 

Please follow all local building and plumbing codes.

• 

The height and placement of the shut off valves will be based on the installation height of 

the shower panel, see fi gure A. The installation height is approximately the total distance of  

measurement A and measurement B.

• 

The fi nished wall opening for the valves should not be larger than 4.5” wide by 6” tall. Make sure 
the opening is completely waterproof to prevent any water leaking into the wall space. (NOTE: 

Product warranty does not cover any damages caused by water leak due to negligent and 
improper installation of the shut off valves and the shower panel.)

• 

A laundry outlet box such as the Sioux Chief Ox Box

TM

 can be used to speed up the installation 

process of the shut off valves.

Содержание PL-005-SS











Отзывы: