Instruction manual
aircontrol S 110V
page 11
8 Display-indication
8.1 aircontrol
After switching on the aircontrol there are 3 information displayed in the top line:
Top left
=> device status
Possible status indications (S followed by 3 numbers):
First digit 1 to 8
Number of the present measuring channels
Second digit 1
Optional printer present
Second digit 2
Optional memory module present
Second digit 3
Printer and memory modules present
Third digit 1
Optional communication module present
Top middle
=> Actual time
Top right
=> Alarm status
Possible alarm status indications:
A100
Alarm evaluation deactivated
A101
Alarm evaluation is activated, no alarm has been identified
A102
Alarm low identified, the delay time is running
103
Alarm high identified, the delay time is running
A104
External alarm identified, the delay time is running
A112
Alarm low identified, the delay time has expired
A113
Alarm high identified, the delay time has expired
A114
External alarm identified, the delay time has expired.
Underneath the top line, the dynamometer is displayed with the actual measured
negative pressure values.
Alarm status
Time
Device status
Dynanometer(1 – 8)
Measuring value
Indication for inserted
options (e.g. battery)
