Key Operations
28
1 Screen contrast
The touch screen contrast can be adjusted.
Press the plus key, to sharpen the screen contrast.
Press the minus key, to fade the screen contrast.
2 Sound control
The buzzer volume can be adjusted. The volume level can be set
from 0 to 10 and the default setting is 5.
Press the plus key to increase the buzzer volume.
Press the minus key to decrease the buzzer volume. To mute the
buzzer, set the level at 0.
3 Eco mode
If you have not used the computer for some time it will enter the
eco mode. The touch screen and the sewing light will turn off. They
will turn on again, when you touch the screen.
You can set the timer from one minute to 30 minutes.
Press the plus key to increase the timer setting.
Press the minus key to decrease the timer setting.
To deactivate the eco mode, press the plus key until «OFF» appears
in the box.
4 Inch/Millimeter
You can set your computer’s measuring unit to either inch or
millimeter depending upon your preference. The default unit setting
is millimeter.
Press the «inch» or «mm» key to select the unit you preferred.
5 Touch screen calibration
If the touch panel doesn't respond as expected, the key positions
might be out of alignment. To realign press the Yes key. Window (A)
will show a sequence of crosses signs. Press the cross with your
finger tip. Having pressed one cross the next will be shown. Window
(B) shows for a few second when the calibration is completed.
6 Embroidery maximum speed:
The embroidery computer automatically adapts the stitch speed to
the design: slow for long stitches and fast for short stitches
The maximum embroidery speed can be changed from 400 to 750
spm. The default setting is 650 spm.
Press the minus key to reduce the maximum embroidery speed.
Press the plus key to increase the maximum embroidery speed.
Note:
•Reduce the embroidery speed when designs with narrow satin
stitches are sewn. Those tend to become uneven at high speeds.
•When the speed of 750 spm is selected a warning message is
shown. (C)
+
+
+
1
0
0
2
3
4
5
1
2
1
2
3
4
Touch Screen Calibration
Press ( ).
(A)
Touch Screen Calibration
End
(B)
(C)
Key Operations
28
1 Screen contrast
2 Sound control
3 Eco mode
4 Inch/Millimeter
5 Touch screen calibration
6 Embroidery maximum speed:
Note:
+
+
+
1
0
0
2
3
4
5
1
2
Touch Screen Calibration
Press ( ).
Touch Screen Calibration
End
+
ON
X
650spm
Yes
Maximum speed setting
OFF
Содержание bernette 340
Страница 1: ......
Страница 3: ...2 ...
Страница 64: ...13 04 EN 854800087 502060 06 63 Copyright 2011 Bernina International AG Steckborn ...