DECKED.COM
|
#DECKEDUSA
|
@DECKEDUSA
MT5 / MT7 | v.1.1 |
Page 3
▼
ASSEMBLY OVERVIEW
▼
▼
HEY! TORQUE BOY: READ BEFORE YOU INSTALL DECKED
▼
1.
DON’T
be an idiot read the instructions.
2.
DON'T
over tighten bolts, get em' hand-tight.
3.
DON'T
use power tools.
4. If you don't follow directions and
do use power tools:
1).
Set clutch at a very low setting.
2).
If you blow it, see NOTE.*
NOTE*
Two extra threaded inserts are included in
BAG
PREP-EXTRA
. That’s all you get. The inserts will replace any
stripped inserts in the tailgate ammo cans, but NOT THE CENTER VERT, so hand tighten until snug only! You can
also screw the inserts back in if dislocated. There is a straight screwdriver slot on the underside of the insert.
5. Start all bolts with fingers to avoid cross-threading
6.
DON'T
over tighten J-hooks during installation.
Make 'em good and snug enough to keep the
system from moving in the bed.
7. Nice job if you’re still reading .
Prevent abusive, expletitive-filled language, watch our detailed installation video
or give us a call. We’re happy to help!
208.806.0251 | DECKED.COM/INSTALLVIDEO
A
CAB
➡
MAKE SURE MARK SITS AT LEAST
14" HIGH (SO YOU CAN SEE IT)
DETAIL A
PREP BED:
MARK CENTER OF BED
• Use a marking pen or wax pencil to mark
the center of the bed (blue) on the raised bead.
