DECKED. COM
|
#DECKEDUSA
|
@DECKEDUSA
DS1 | v.4 |
Page 11
INSTALL:
DRAWERS
(HOPEFULLY YOU’RE STILL WEARING YOURS.)
• Save yourself the headache, watch this short installation video:
DECKED.com/videotailgatewheels
.
• Install the drawer by sliding wheels into their two channels (C-channel and center vert), and slide drawer all the
way forward until closed.
• Install the remaining tailgate side wheels onto their axles;
BAG
WHEELS
.
NOTE: Placing a spacer under the drawer to raise it into position makes this easier
(ammo can lids work well, or a small piece of 2x2 or 2x4 is even better).
• Install the weather strips on the tailgate side drawer edge: With the weatherstrip wiper facing cabside, line up one
end with the side of the drawer and place on the top drawer edge, firmly pressing down on the weatherstrip as you
move along the drawer edge.
NOTE: Facing the weather stripping the wrong way will funnel water into drawer:
BAD!
• When the weatherstrip is fully seated along the top edge, trim off any that extends beyond the drawer edge with
wire cutters. Watch out for the stainless wire coil inside; it’s sharp!
WHEELS
CABSIDE
WEATHER STRIP
