12
MIDI Continuous Control
Any of the Time After Time’s knob settings can be controlled in real time using MIDI
Continuous Controllers. The following chart shows the CC#s for the various controls:
Function
CC#
Value
DELAY TIME
34
0-127
FEEDBACK
35
0-127
MOD DEPTH
36
0-127
MOD SPEED
37
0-63=SLOW, 64-127=FAST
MIX LEVEL
38
0-127
TAP MODE TOGGLE
39
any
BYPASS
40
any
TAP
41
any
So as not to cause a jump in parameter value when receiving MIDI CC data, the Time
After Time will not begin to respond to MIDI CC data until the received CC value is the
same as the current value of the corresponding control.
MIDI Clock
If the Time After Time is in TAP MODE, it will sync to incoming MIDI Clock messages. It
will only sync to MIDI Clock tempo messages. The Time After Time will not respond to
MIDI Start, Continue, Stop or MIDI Time Code commands.
MIDI Clock and tap tempo both control the same global tempo of the Time After Time.
Therefore, if you tap in a tempo and then a MIDI Clock is recognized on the MIDI input
channel, the MIDI Clock will override the tap tempo. Likewise, if MIDI Clock is stopped,
tap tempo will control the global tempo.
