Railmast
er
™
U
ser
’s M
anual
17
4.3 Trigger
The radar transmits and receives microwave energy when you pull
the trigger . To measure the speeds pull and hold the trigger .
4.4 Mounting Configurations
The radar is designed for hand-held operation . Optionally, you can
mount it to a standard camera tripod .
5. Operating Modes
The MENU and SEL buttons on the Railmaster™ control panel lets
you review and change programmable settings . The radar gun will
remember the settings you last set when it is turned off and will
power up with them .
5.1 Menu
You can use the factory default settings or you can select your own
settings . To select a setting, repeatedly press the MENU button until
the setting you want to change appears . Then press the select (SEL)
button to advance through the selections for that setting . When you
have made your selection, release the button and your new settings
will be in effect . If neither MENU or SEL is pressed after 2 seconds, the
radar gun will return to normal operating mode, capturing whatever
settings you have selected to that point .
The menu options are:
• bl = Backlight (on/off)
• SN = Sensitivity (1-6 with 6 being maximum sensitivity)
• Pr = Serial port setting (0 - 7) See port selection Table 5 .2
• Su = Units of measure (0 = MPH, 1 = KM/H)
• Pd = Automatic power down (on/off)