anti-clockwise away from motor base, and lift it off. Empty the
processed food.
CAUTION: The “S” blade is extremely sharp, handle with care.
06
4. Then place the prepared chopping food into the jar. The food
must be cut into small size firstly (such as 2cm*2cm*6cm for
beef). During chopping, you can add food through the feeding
funnel with the pusher, never using food or finger to push the
food into the feeding funnel.
5. Place the lid onto the jar and turn it clockwise until the tab of
the lid clicks into slot in the jar handle. Make sure it is locked in
position correctly, otherwise the appliance will not operate.
6. Connect the appliance to power supply and set Speed
Selector to your desired speed.
7. There are four setting: P, 0, 1, 2. The 1 setting is the low speed,
the 2 setting is the high speed. Turn the selector to P position
and hold it to pulse actuate motor for delicate chopping.
Release it to return the 0 position. The Pulse mode allows you
to create a burst of power for quick, efficient blending. You can
chop up to 400g of following foodstuff.
Hard substance: cheese, dried fruits, and certain vegetables
(carrots...)
Soft substance: certain vegetables (onions…)
Raw and cooked meat (boned and sliced)
CAUTION: The total operating time should not be more than
90 sec.
8. Turn the Speed Selector to “0” position and unplug the
appliance after chopping. Open the top lid and grasp blade by
its hub and remove. Unlock chopping jar by turning it in