decakila KEJB002W, Быстрый старт

Страница: 5 / 8

EN
•
For fast or delicate blending tasks, turn the speed knob to the P position and hold it down for
a few seconds and then release it, the knob will reset to the O position automatically. Use
several times until the desired consistency is obtained.
•
If you want to add ingredients while the blender is running, remove the measuring cup and
place it through the opening in the lid. (See figure 7)
•
When crushing ice or hard food, keep one hand firmly on the lid.
• When you get the desired consistency, turn the knob to the O position.
Note: For each use, the consecutive run time should not exceed 2 minutes. A rest time of at least
10 minutes should be maintained between two continuous cycles, allow the unit to cool to room
temperature before performing the next cycle of operation.
If you want to stop the machine during operation, turn the knob to the O position at any time.
Before blending, add the food to be blended
into the jar.
During blending, add ingredient through lid
opening.
FIG. 6 FIG. 7
5. OPERATING TIPS
•
For better circulation of food to be mixed with a little liquid, first pour the liquid into the jar and
then add the solids.
•
Some of the tasks that cannot be performed efficiently with a blender are: whipping egg
whites, whipping cream, mashing potatoes, grinding meat, mixing batter, extracting juice from
fruits and vegetables.
•
The following items should never be placed in the unit as they can cause damage: bones,
large pieces of solid food, frozen or hard food such as turnips.
•
To crush ice, add up to 6 ice cubes. If you need more ice, remove the cup and add the cubes
one by one through the opening in the lid.
6. CARE AND CLEANING
•
Before cleaning, unplug the blender.
• Always wash immediately after use to facilitate cleaning.
•
Do not allow food to dry in the jar assembly as this will make cleaning difficult.
• Pour some warm soapy water into the jar and turn the knob to the P position for a few
seconds. And then empty the jar.
• Remove all removable parts. Lift the jar assembly out of the motor unit. To detach the blade
assembly by turning it clockwise from the bottom of the carafe base, and remove the blade
assembly (see figure 8). Also, separate the sealing ring 1 of the carafe lid from the carafe lid.