DEC USB Tilt Swivel Stand, Руководство по установке

Страница: 5 / 6

1
Introduction
The USB Tilt/Swivel Stand is an optional tilt/swivel stand for your monitor. It is self-
powered having its own power supply and needs an external AC power source. The USB
tilt/swivel stand provides up to seven downstream ports of you to connect USB compliant
options. All downstream ports support both full- and low-speed operations.
You install the USB tilt/swivel stand instead of the normal tilt/swivel stand that comes with
your monitor. If your monitor already has a stand installed on it, you will need to remove
this stand first, before installing the USB tilt/swivel stand.
Tilt/Swivel Stand Installation
Removing a Previously Installed Tilt/Swivel Stand
To remove the stand already installed on your monitor, pull on the latch or other mechanism to
remove the stand. Refer to your monitor installation guide for specific instructions.
Installing the USB Tilt/Swivel Stand
To install the tilt/swivel stand:
Insert the hooks on the stand into the bottom of the monitor.
Apply pressure near the back of the bash so it slides forward and become secure.
Set the monitor on the stand.
Connect the power unit to back of the tilt/swivel stand and to the power source.