4
ASSEMBLY COMPONENTS
Click
to view a video on assembling the DeBug Beach Wheelchair
5/16”-18tp x 2-1/4” SS REAR
SUSPENSION BOLT
1/4”-20tp x 1-1/4” SS
BACKREST BOLT (2 EACH)
1/4”-20tp x 2-1/2” SS MAIN
AXLE BOLT (2 EACH)
5/16” LEG REST
ADJUSTMENT KNOB (2 EACH)
1” SS MAIN AXLE FLAT
WASHER (2 EACH)
1/8” SS MAIN AXLE
HITCH PIN (2 EACH)
REMOVABLE ARMREST
OPTIONAL DRINK HOLDER
LEG REST
ADJUSTMENT KNOBS
1/4”-20 x 1-1/4” S.S. HEX BOLT
2 EACH FOR BACKREST OR
OPTIONAL 1/4” QUICK
RELEASE PIN
5/16”-18 x 2-1/4” S.S. HEX BOLT
1 EACH FOR REAR SUSPENSION
OR 6/16” QUICK RELEASE
PIN OPTION
1/4”-20 x 2-1/2” S.S. HEX BOLT
2 EACH FOR MAIN AXLE
ASSEMBLING INSTRUCTIONS
1. Slide on the leg support sling, and install
the two 5/16”-18 adjustment knobs
2. Slide on the foot plate, and tighten the leg
rest adjustment knobs
3. Install the mid axle, tighten the two
attaching 1/4”-20 bolts
4. To install the backrest, slide the backrest
down on the chair frame and attach using
the two 1/4”-20 bolts
5. The rear suspension may be attached by
inserting the rear suspension tension bolt.
This bolt should be tight during use.
DISASSEMBLING INSTRUCTIONS
1. Loosen the leg length adjustment knobs
and slide out the footplate
2. Slide off the leg support sling by removing
the two 5/16”-18 adjustment knobs
3. To remove the mid axle, loosen the two
attaching 1/4”-20 bolts
4. To remove the backrest, remove the two
attaching 1/4”-20 bolts and slide up on
the backrest
5. The rear suspension may be detached by
removing the rear suspension tension bolt.
This bolt should be tight during use
