IDEATEC S.A. - Z.I. de Noville-les-Bois - rue Léopold Génicot 19A - 5380 Fernelmont, Belgium - Tel: +32(0)81 42 00 10 - Fax: +32(0)81 57 91 70 - E-mail: [email protected]
User’s Guide Unitherm-HD -
Doc. V1.0 - Module V1.4a
Page 15
X9.2
X9.1
X9.3
X9.4
X8.2
ON
BUS
BUS
OR
Imperative
main fuse
Supply
+10 to 28VDC
No power supply
Power supply OK
Temperature sensor OK
8.
DS-18S20 SENSOR
Modes/Mounting (following)
Automatic
OR
Properties Nr 28 or 32
LINKED SYSTEM
i
shows the error codes generated by
the Webasto. Please refer to the
error list provided by Webasto to
know the signification.
Thanks to its screen, the GO-112
8.3 Mode 3 A/B : Webasto ST with or wihtout airco (following)
8.3.2
Webasto ST only
Mode 3-B :
Installation of the
interface to control heating systems Webasto ST like AirTop
2000ST/3500ST/5000ST or Air Top EVO 3900/5500.
UniTherm-HD
Communication with Webasto by K-Line OK
Communication with GO-112 or MCduo OK
No communication with GO-112 or MCduo
No temperature sensor
(Error codes, see user guide Webasto)
Led directly controlled by the Webasto
No communication with Webasto by K-Line
BLUE
RED
BLACK
GREEN/WHITE
WEBASTO UNIT
WHITE
Connector placed on the
original potentiometer.
