ADDING THE WHITE BORDERS
Assembled
eyes
Repeat Step 9 for
the second eye to
complete this stage.
9
8
BE CAREFUL!
FRONT
BACK
Do not force the border on at an
angle. This is harder to do, and may
crease or tear the reflective tape.
Compare the white borders, as shown above, so you
can see which way round they fit. The front is raised
and the back has a recessed rim.
Slide a white border over one of the black eyes, with the raised
front of the border on the same side as the rounded front of
the eye. Be sure to keep the parts straight.
Store the unused parts away safely in plastic bags until next time.
This will protect the polished surfaces and prevent them from
becoming scratched.
Later on in the assembly, you will be fitting Robi’s eyes with
LEDs, which will illuminate the white borders you have just
fitted. The LEDs come in a range of colours including orange,
green, pink, purple and blue. The colour varies depending on
Robi’s mood and the activity he is currently performing: for
example, when dancing, his eyes will continuously change
colour (as well as flash on and off) to the music. Robi’s mouth
is also fitted with an LED that lights up when he is talking,
further adding to his expressive qualities.
A FACE THAT LIGHTS UP!
05
KEEP THE PARTS TIDY
