Dea 220H, Инструкции по эксплуатации и предупреждения

Страница: 21 / 88

19
6 PROCEDURES
1 Deleting the Memory (default settings)
Phase Description Example
1
Press and hold the programming button of the MINI-RX until the LED on the receiver performs a
blink and the buzzer performs an acoustic warning.
2 After about 1 second by the release of the button, the LED on the receiver emits five flashes.
3 Press the button of the receiver during the third flash.
4 If cancellation is successful the receiver will emit 3 short flashes and 3 acoustic warnings.
5 End
2 Remote Controls Memory Erasure
Phase Description Example
1
Press and hold the programming button of the MINI-RX until the LED on the receiver performs a
blink and the buzzer performs an acoustic warning.
2 After about 1 second by the release of the button, the LED on the receiver emits five flashes.
3 Press the button of the receiver during the 4th flash.
4 If cancellation is successful the receiver will emit 5 short flashes and 5 acoustic warnings.
5 End