0
2
M
A
T
T
H
E
W
H
I
L
T
O
N
ASSEMBLY INSTRUCTIONS CONTINUED
BRETTON BED
1. ATTACH CENTRAL BEAM TO HEADBEAM AND FOOTBEAM
a) Unpack components and lay them face down on the floor, so
they are in the correct orientation. Check for number markings.
b) Place cutout of central beam onto the cutout on the head-
beam, by slotting the wooden dowels into the corresponding
holes.
SALES@
DE
LA
ESP
AD
A.C
OM
DE
LA
ES
PA
DA
.C
OM
NOTE 5: When screwing in bolts, tighten well, but be sure
NOT TO OVERTIGHTEN. This can cause the thread to strip thus
resulting in a poor connection.
NOTE 6: All mating parts are numbered so they correspond to
the appropriate part around the frame of the bed. you will
ensure the best possible fit if all parts are mated with the
corresponding numbered parts. While you work, be sure all
connections are flush with no gaps.
INSTRUCTIONS
c) Place cutout of central beam onto the cutout on the foot-
beam, by slotting the wooden dowels into the corresponding
holes.
