0
2
M
A
T
T
H
E
W
H
I
L
T
O
N
ASSEMBLY INSTRUCTIONS CONTINUED
OVERTON TABLE
to our information sheet “Unpacking Your Furniture” for further
details.
NOTE 3: Great care is required when assembling our products .
Use blankets to soften the assembly surface - hard surfaces
such as wood or stone flooring may damage the furniture if in
direct contact.
NOTE 4: We advise that assembly and disassembly is undertaken
by a minimum of 3-4 people.
NOTE 5: When screwing in hardware, tighten well, but be sure
NOT TO OVERTIGHTEN. This can cause the thread to strip thus
resulting in a poor connection.
NOTE 6: After assembly, ensure that the table is resting on a
level surface.
IMPORTANT! ALWAYS USE GLOVES WHEN HANDLING BRASS PRODUCTS.
Our brass is coated with a thin layer of wax to embrace the
natural patina that will develop over time. Never handle brass
with your bare hands, as the oils in your skin will cause the
surface to oxidise more quickly in the areas you touch, high-
lighting your finger prints. If you ordered your product in
brass, you will find white gloves in the supplied hardware box.
INSTRUCTIONS
1. ASSEMBLE THE TABLETOP
a) Place the two halves of the tabletop face down on a clean,
soft surface on the floor, aligning the pre-drilled holes.
SALES@
DE
LA
ESP
AD
A.C
OM
DE
LA
ES
PA
DA
.C
OM
