Page 32/37
WOOD CHIPPER | User manual
May 2021
4.6
Transport
If you want to transport the machine, you must read and observe these instructions:
1.
Make sure there are no bystanders in the area. Pay especial attention to small children.
2.
Check whether all required lights and reflectors that are required by the traffic authorities are at the correct
positions, whether they are clean and whether they work.
3.
Make sure the machine has been fastened properly to the tractor with a locking pin through the mounting pins.
4.
Do not allow anybody to hitch a ride on the machine.
5.
Never exceed the safe driving speed. Slow down when traffic conditions are rough and in bends.
6.
Do not drink alcohol if you have to drive.
7.
Turn the discharge hopper in the direction of the rotor to
make the machine narrower.
Transport safety
•
Comply with all national and local legislation in relation to the safety and transport of machines on public
roads.
•
Check whether all lights, reflectors and other lighting facilities are installed and in good working order.
•
Do not exceed the safe driving speed during transport. Slow down on rough terrain and when taking bends.
•
Do not leave the machine running in a closed building to prevent suffocation by exhaust gases.
•
Put the feed hopper up and fasten it before moving or transporting the machine.
•
Make sure the machine has been fastened properly to the towing vehicle and that there is a locking pin
through the mounting pins.
•
Never drink alcohol or take medication that may impede your alertness or coordination during the use of
this machine. Consult your general practitioner if you take prescription medication.
•
Do not allow anybody to hitch a ride on the machine.
•
Be a safe and thoughtful driver. Always give priority to oncoming vehicles under all conditions such as
narrow bridges, intersections, etc. Pay careful attention to other road users.
Locking
