Version 3_EN - 03.08.2018
6
Replacement Board SERIES3 De Agostini Millennium Falcon
Hints
•
All channel power connections jumper set to power supply voltage
•
The 5V step-down module comes with a heat sink, which should be mounted when 3A
power is required - during normal operation without additional loads, the heat sink is not
needed.
Figure 4 Step-Down-Modul
•
The 6 pin connector is for the Nano and is not normally needed.
•
The mounting holes in the board must be drilled out with a 2.5mm drill bit
•
When connecting non-original deAgostini lighting, pay attention to the values of the
lighting set - voltage, current, pin assignment.
The board is pin-compatible with the deAgostini board.
