EN
3
INSTRUCTIONS FOR ASSEMBLY
●
Unscrew knob
1
and insert the paper roll holder
2
Turn
the knob clockwise until fully tightened.
2
1
●
Always disable the wheels before using the bed and once
it is in the desired position.
OPERATION
●
Connect the bed to an electrical outlet using the power
cord.
●
Hand controller
-
Adjusting height
• Use the buttons
and
of the control knob to
adjust the stretcher height.
●
Manual functions
-
Adjusting backrest tilt
• To raise the backrest, move lever
1
to activate the gas
piston while gently holding the backrest to prevent it
from raising too quickly.
1
• To lower the backrest, move lever
1
to activate the
gas piston and push the backrest
2
down until the
desired position. On releasing the lever, the backrest
will remain in that position.
1
2
CLEANING AND MAINTENANCE
●
Before cleaning the device, unplug it from the mains.
●
Clean the device with a soft, dry cloth. Do not use liquids
to clean it.
●
For maintenance or repairs of any part of the product,
please contact your distributor or specialised technician.
RECYCLING
If you need to dispose of the product or any of its parts
or accessories, please check and respect the laws
and regulations applicable to waste management and
environmental protection.