ddtop UHC Magnetic Level Gauge, Руководство по эксплуатации

Страница: 13 / 17

13 / 17
WWW.DDTOP.COM
The units that can be set are: m, cm, mm, feet, and inch.
① Long press the ‘←┘’ key to enter the configuration mode (first menu No. 1 is displayed,
the up and down arrows on the left are lit).
② Press the "↑" key to switch the menu to No. 2, and the current unit symbol is displayed in
the lower right corner.
③ Press the "←┘" key again, and the unit starts to blink. At this time, press the ‘↑’ key or ‘↓
to switch to the unit you want to set.
④ Press the "←┘" key again, the unit setting is completed and the up and down arrows on
the left will light up.
Unit Setup
7.1.7 Range setting
Set the lower limit of the range LRV.
① Long press the ‘←┘’ key to enter the configuration mode (first menu No. 1 is displayed,
the up and down arrows on the left are lit)
② Press the "↑" key to switch the menu to No. 3, and the LCD will display the current LRV
value.
③ Press the "←┘" key again, and the symbol starts to flash. At this time, press the ‘↑’ key or
‘↓’ to switch to the sign you want to set.
④ Press the "←┘" key to complete the symbol setting and start to set the highest digit of the
range. At this time, press the "↑" key or "↓" to increase or decrease the current flashing digit
and press the "←┘" key confirm, set other digits and decimal points in sequence, and the