8
2.
Next, adjust the function dial on the remote transmitter to a position other than OFF and
press the toggle button (if required) until the LED light next to the number “1” is switched
on to indicate that the remote transmitter will operate at the transmission frequency of
the first paired receiver collar (which by default is the receiver collar that is shipped
alongside the remote transmitter).
3.
Next, press the sound button on the remote transmitter and see whether the receiver
collar responds with an audible tone signal.
Press
If an audible tone signal is detected, it means that the two devices have been properly paired.
Otherwise, please go through the pairing instructions on page 11 to pair the receiver collar
with the remote transmitter.
8.
Testing the Static Stimulus Function
A test light tool is included with the packaging box for the purpose of testing the static
stimulus function of the collar.
1.
To begin testing, place the test light on top of the metal probes as shown below.
Sound Activated Sensor
On/Off
Button
