© DDO2018
4
Removing/ placing the footrests
Placing the footrests on the frame
The footrest is pre‐assembled on the frame from the factory
The footrest height and length can be adjusted as explained in the
D‐Xjunior assembly manual.
Removing the footrest from the frame
The footrest can be removed from the frame by untightening and
removing the tube clamps used for the footrest mounting.
Removing/ placing the side guards
Slide the side guard in and out of the side guard socket to place or
remove the side guard on/from the frame.
Removing/ placing the rear wheels
To mount the rear wheels on the frame, place the rear axle through
the hub bearings and place the frame spacer on the rear wheel
axle.
Select the active or safe rear wheel axle position.
Mount the rear axle in the frame axle sleeve.
Tighten the locking nut.
Tilting the wheelchair
Push the bottom rail rear end down while pushing down and back
on the push handles.
Tilt the wheelchair, as needed.
