4
5. Make sure to press the tape down
to secure it to the hood vent
thoroughly. Then start to peel off
the red backing on the tape.
6. Once the backing is all peeled off,
install the insert onto the back of
the vent, starting at the top corner
agsin. Be careful to keep the insert
from touching the double sided
tape until the mesh in fully in place.
Once the mesh is in place press the
bottom of the mesh against the
double sided tape to secure it in
place.
7. Hold pressure on the bottom of the
mesh insert for about 10 seconds in
different areas and repeat until you
cover the entire vent where the
Installation of hood inserts
Finished install
Insert top corner first, then
edge
Congratulations!
You have finished the install. All of us
here at DDMWorks thank you for your
purchase and hope you enjoy your
new mesh inserts!
If you have any questions feel free
to give us a call or text us at
864-907-6004.
You can also email us at
[email protected].
Follow us on Face book, Instagram
and Twitter for the latest product and
information and product releases!
