5
5. Connection Configuration
5.1 Connect to Network
Step 1:
Plug the included USB cable into the HEV-2KW to power on it.
Step 2:
Open your wireless networking utility on your PC or mobile device to search
SSID called "HEV-2KW" and access to it by the password "12345678". This step is
only required in AP WI-FI mode.
Step 3:
Set IP address of your PC, Navigate to 5.2 to see how to set the IP address of
your PC. Then open a web browser and enter the network’s IP address. In AP mode,
the default IP address is “192.168.1.252”; while in STA mode, please login to the WEB
UI by IP address that the router assigns to the HEV-2KW. Make sure your device is in
the same network domain with HEV-2KW.
Step 4:
Login to the interface wi
th the default user name and password as “admin”.
Step 5:
Navigate to Network Configuration interface to enter the network name (SSID)
for router network and the password to access it; or choose “refresh” for available
wireless networks, select your network SSID, enter the password and then click
“Save”.
Step 6:
Hold the button of HEV-2KW for about 3s until the status of LED changes to
switch the WIFI mode as STA. LED indicator usually turns red first and then turns
green when STA is successfully connected to the network. Do not keep pressing the
button because the HEV-2KW will be restored to factory settings after pressing for
more than 15 seconds.
Step 7:
Re-login to the WEB UI via the static IP address that you have set or the IP
address that the router assigns to the HEV-2KW.
5.2 Change the IP Address of PC
→ On a Windows PC: Press the
+R on your keyboard.
→ Enter “control netconnections” in the run box and press “Enter”.
→
You should see at least two types of network connections: Ethernet and WI-FI.
Double-click the active network connection.
