Data Device Corporation
22
BU-65572T Manual
6
DDC 1553 CARD MANAGER FOR WINDOWS NT
Once you have installed the hardware and software, you are now ready
to configure the device. Device configuration is performed through the
use of the
DDC 1553 Card Manager
located in the
Windows Control
Panel
. The following are basic instructions to configure a card in
Windows NT.
The
DDC 1553 Card Manager
is used to set a device number (logical
number) for the card you are using. This number is used by the RTL to
identify the card. By default an installed card will have a Device number
of none. The user must select a number from 0 to 31.
1) Turn on the computer.
2) Open the Windows Control Panel by clicking on the
Start
button.
Then click on the
Settings
option. Finally, click on
Control Panel
.
Figure 23. Control Panel
3) Double-Click on the
DDC 1553 Card Manager
icon (circled in the
screen image above).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com