DD-EFI Pro Dash, Быстрый старт

Страница: 3 / 5

3 | P a g e
Sensor Connector
Wiring Video
I/O Connectors
The DD-EFI Pro Dash has (2) I/O Connectors for Sensors and Digital Inputs. Below are diagrams outlining what each Pins
location, function, and wire color in the 12 Pin and 10 Pin black connectors. Provided: Sensor and Digital Wiring
Harnesses, 2:6 Lever Lock Connector, (4) T-Tap Connectors (Used for: Fuel Level, L/R Turn Signals, High Beam)
Sensor Connector
•
(5) ADC (Analog) Inputs :
o
Sensor 5, this is pre-configured in DD-EFI Dashboards
for Oil Pressure
o
Requires a Digital Pressure Sensor or we offer one at
https://dd-efi.com/collections/accessories
•
The 5V Sensor (Red Wire) and Ground Sensor (Black Wire)
get used for all Sensors 1-5 as outlined in the diagram to the
right. Provided is a 2:6 Level Lock Connector to simplify the
wiring process.
•
Fuel Level (Yellow Wire) has an internal circuit making the
wiring of your factory vehicle fuel sending unit a single wire
connection. Attach the yellow wire to the
fuel level’s signal
wire. Provided T-Tap Wire Connector for easy connection
o
Don’t forget to choose the correct fuel level gauge
for your vehicle due to having different empty/full
ohm readings
o
Direct connection from the sender; no slosh module