DCS RF151, Инструкции по установке и Руководство пользователя

Страница: 10 / 36

8
INSTALLATION INSTRUCTIONS
Installing your ice maker
Select location
The proper location will ensure peak performance of your appliance. We recommend a
location where the ice maker will be out of direct sunlight and away from heat sources.
To assure your product performs to specifications the recommended installation location
temperature range is from 55 – 80°F (13 – 27°C) for built in ice makers, 55 – 90°F
(13 – 32°C) for freestanding ice makers. Ice maker will not perform correctly in ambient
temperatures less than 55°F (13°C).
IMPORTANT!
Outdoor installation
● ●
Building codes may require a ground fault circuit interrupter electrical receptacle
to supply electrical power to the ice maker for outdoor applications, (see ‘Electrical
connection’ in the ‘Installation instructions’ section).
● ●
Do not install in a location where the ice maker will be exposed to direct sun exposure
as this may result in unsatisfactory performance.
Winterizing your outdoor ice maker
For instructions on winterizing your ice maker see ‘Preparing the ice maker for storage’.
Cabinet clearance
Ventilation is required from the bottom front section of the ice maker. Keep this area
open and clear of any obstructions. Adjacent cabinets and counter top can be installed
around the ice maker as long as the front grille remains unobstructed.
Front grille
Do not obstruct the front grille. The openings within the front grille allow air to flow
through the condenser heat exchanger. Restrictions to this air flow will result in
increased energy usage and loss of cooling capacity. For this reason it is important this
area to not be obstructed and the grille openings kept clean. DCS by Fisher & Paykel
does not recommend the use of a custom made grille as air flow may be restricted
because of inadequate openings.
Front grille, keep
this area open
Rear leveling legs
Front leveling legs