18
TO LIGHT DUAL SIDE BURNERS (48BQR MODELS ONLY):
CAUTION:
The side burner cover may be hot if the grill burners are in operation.
First remove the burner cover and any cooking utensils from the burner grate. Push and hold the
ignition button, turn the control knob to the “HI” position until the burner is lit or 4 seconds pass. If the
burner doesn’t ignite, wait 5 minutes for any accumulated gas to dissipate then try again. If the burner
will not light after several attempts, wait 5 minutes and then the burner can be match lit by holding a
lit match next to the burner ports and turning the correct valve to “HI”.
Your Grill is equipped with the same heavy cast iron side burners
which we use on our line of quality restaurant ranges. Each is
rated at 15,000 Btu/hr and has battery ignition for efficient
lighting. The burner grates are porcelain enamel over cast iron
for durability. To cover the power burners when not in use, each
grill comes with a stainless steel cover which doubles as a work
surface. When using the grill burners with the side burner cover
in place, be careful as heat can conduct from the grill section and
cause the cover to heat up.
NEVER
attempt to light the power burners with the cover in place.
Flame Height:
The correct height of the flame depends on the size and material of the utensil being used, the food
being cooked and how much liquid is in the utensil. Here are some basic rules for selecting the flame
height.
■
The flame should never extend beyond the bottom of the pan (see Fig. 19).
■
Utensils which conduct heat slowly (such as glass-ceramic) should be used with a low or
medium flame unless you are cooking with a large amount of liquid.
3/8"
1-1/2"
FIG. 19 Side Burner
Proper Flame
LIGHTING INSTRUCTIONS
