manualshive.com logo in svg

DCS 900E, Руководство пользователя

Поделиться
Скачать
DCS 900E Скачать руководство пользователя страница 57

dCS 900E / 902E

 User Manual

 Manual for Software Versions 1.3x to 1.5x

dCS

 Ltd 

12

th

 June 2000

Manual part no: DOC0029021E1

Page 57

Document No: OS-MA-D0002-902.1E1

Contact 

dCS

 on + 44 1799 531 999 

email to: [email protected]

(inside the UK r 44 with 0)

web site: www.dcsltd.co.uk

Software

Installing New Software

The operating software can be downloaded via the RS-232 link from a PC com
port, using the Windows Remote software running on the PC.

To use this, follow the installation instructions on the floppy discs the remote
software is supplied on. Then, run the remote programme, with whatever units
you want connected. The software will scan the RS-232 chain for units (this
takes a while) to see what is connected.  It then reports back and for each there
is an info button. This gives you the option of installing new software in that unit.

To find out if there are any software updates available for your equipment, call
us, or email us, with your unit’s serial number.

Hardware Update or Calibration

You may wish to have your unit updated occasionally. 

dCS

 

offer this service - we

will install any modifications or updates that have occurred since your unit was
first shipped, and give the unit a full retest to current standards. The price will
depend on the hardware changes necessary – so contact your dealer or us. In
order to ensure speedy turn around please contact us prior to returning the unit.

Safety and Electrical Safety

There are no user serviceable parts inside the 

dCS 900 

&

 902 

and so there is no

need to remove the covers, apart from front panel software updates. If for some
reason you do:

IMPORTANT!

 

Disconnect from the mains before removing any covers or changing the fuse.

There are no substances hazardous to health inside the 

dCS 900 

&

 902

.

Содержание 900E




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды