
35
7. SETUP
Move the cursor to the Setup item in the main
menu and press [home] button, SETUP menu appears,
as shown in the following figure.
Language: menu language, Optional items: EN,
Chinese
ColorSys: Set the DVI system, color in the
analog signal, Optional items: YPbPr, RGB
(
Only
effective under 720 p60/1080 p60
)
HDMIMode: Set the HDMI output signal mode,
Optional items: On, Off
Protocol: Control protocol type. Optional items:
VISCA,P-D,P-P
Address: protocol address, To be decided
according to the agreement, can be set up under the
VISCA items: 1 ~ 7, P - P and P- D can be set up: 0 ~
254
AddrFix: If I can change through the serial port
of infrared switch, Optional items: On, Off
(
When set
to On, cannot address via a serial port to modify the
camera
)
Net Mode: The net mode of camera, Optional
items: Serial, Paral
Baudrate: Serial port baud rate. Optional items:
2400, 4800, 9600
8. RESTORE DEFAULT
Move the cursor to the Restore Default item in
the main menu and press [home] button, RESTORE
DEFAULT menu appears, as shown in the following
figure.
SETUP
Language
EN
ColorSys
YPbPr
HDMIMode
Off
Protocol
VISCA
Address
1
AddrFix
Off
Net Mode
Serial
Baudrate
9600
Select Item
Change Value
[Menu] Back