D
IGITAL
C
ONTROL
I
NCORPORATED
ii
DigiTrak MFCB Operator’s Manual
403-3400-00-C1, Oct 2013
© 2010
–2013 by Digital Control Incorporated. All rights reserved.
Trademarks
The DCI logo, CableLink
®
, DataLog
®
, DigiTrak
®
, Eclipse
®
, F2
®
, F5
®
, iGPS
®
, MFD
®
,
SST
®
,
target-in-the-box
®
, Target Steering
®
, and TensiTrak
®
are U.S. registered trademarks and
DucTrak™, FBC™, FBP™, F Series™, FSD™, FasTrak™, LWD™, SBP™, SE™, SED™,
SuperCell™, and TeleLock™ are trademarks of Digital Control Incorporated.
Limited Warranty
All products manufactured and sold by Digital Control Incorporated (DCI) are subject to the
terms of a Limited Warranty. A copy of the Limited Warranty is included at the end of this
manual; it can also be obtained by contacting DCI Customer Service, 425-251-0559 or
800-288-3610, or at DCI's website,
Important Notice
All statements, technical information, and recommendations related to the products of DCI
are based on information believed to be reliable, but the accuracy or completeness thereof is
not warranted. Before utilizing any DCI product, the user should determine the suitability of
the product for its intended use. All statements herein refer to DCI products as delivered by
DCI and do not apply to any user customizations not authorized by DCI nor to any third-party
products. Nothing herein shall constitute any warranty by DCI nor will anything herein be
deemed to modify the terms of DCI’s existing Limited Warranty applicable to all DCI products.
The most recent version of this manual is available on DCI's
Compliance Statement
This equipment complies with Part 15 of the Rules of the FCC and with Industry Canada
license-exempt RSS standards and with Australia Class License 2000 for LIPD (low
interference potential devices). Operation is subject to the following two conditions: (1) this
equipment may not cause harmful interference, and (2) this equipment must accept any
interference received, including interference that may cause undesired operation. DCI is
responsible for FCC compliance in the United States: Digital Control Incorporated, 19625
62nd Ave S, Suite B103, Kent WA 98032; phone 425-251-0559 or 800-288-3610.
Changes or modifications to any DCI equipment not expressly approved and carried out by
DCI will void the user’s Limited Warranty and the FCC’s authorization to operate the
equipment.
CE Requirements
DigiTrak receivers are classified as Class 2 radio equipment per the R&TTE
Directive and may not be legal to operate or require a user license to operate in some
countries. The list of restrictions and the required declarations of conformity are available on
DCI’s website,
, under the Service & Support tab. Click on DOWNLOADS
and select from the CE Documents pull-down menu to download, view, or print the
documents.