Instruction Manual SA9670N OSCILLATING HALOGEN HEATER
dcg16.it
6
harmless the parts of the appliance, which could be handled
hazardously by children for playing.
Do not use this heater in the immediate surroundings of both, a
shower or a swimming pool.
Do not put the cable on the appliance when it is still warm.
A correct operation of the appliance is obtained when the heater
is installed vertically. Do not switch on the heater near, pieces of
furniture, curtains, and shelves. Etc.
Do not use the appliance near liquids or inflammable matters.
Do not locate the heater below a socket outlet.
Do not cover the appliance when it is running to avoid overheating
risks.
In case the power cord is damaged send it to the nearest after-sale
service recommended by the manufacturer for the replacement.
Do not connect the appliance to extension cords or multiple outlets.
Do not damage and do not kink the power cord. Before cleaning
the appliance or carrying out any maintenance switch off the whole
system.
If the appliance is out of work switch it off without tampering it.
If any repair is required please contact only the after–sale centers
approved by the manufacturer and ask for original spare parts.
Otherwise safety of the appliance can be compromised.
ASSEMBLY
Assemble the body frame and the base plate together as the
following sequences. Remove the mounting screw from the lower
part of the body frame.
Insert the power cord through the slot placed in the middle part of
the basement and then assemble the body frame to the base plate.
Secure the body frame to the base plate by means of the two
mounting screw previously removed. Insert the power cord through
the suitable slots and then fix it by the clamp.
