DCG PM1800, Руководство пользователя

Страница: 29 / 40

ASSEMBLING THE SLOW JUICER HOUSING
1. Attach the Slow Juicer Housing (U)by pushing it into the matching slots on the Basic Unit
Housing (A). See notes in”Main Unit Housing Backplate”section for assembly
2. Slide the Auger into the Slow Juicer Housing
3. Slide the Juice Pulp Filter(W)in place over the Juice/Frozen Treat Auger(V)
4. Attach the Seal Cap(Y) by twisting it until it locks in place. The Seal Cap has an arrow that will
be centered on the housing when the Seal Cap is locked
5. Place the Juice Collector pitcher horizontally inside the Basic Unit Housing and then place the
Pulp Collector on the outside(refer to the Slow Juicer Mode”section)
SLOW JUICER PARTS
A Basic Unit Housing
W Juice Pulp Filter
K Chute/Tray Y Juice/Frozen Treat
L Pusher Seal Cap
U Juicer Housing Z Extrusion Cap
Round Center
V Juice/Frozen Treat
Auger
NOTE: All juicer attachments are marked with a ”J” to
identify which parts are used for juicing. The parts of
each housing are also color coded to help you identify
which parts are used with which housing.
When choosing a filter and tip for juicing or
making frozen foods:
The solid filter and star tip are for frozen foods.
The perforated filter and round tip are for juicing.
USER MANUAL - MULTI-FUNCTION FOOD PROCESSOR - PM1800