Instruction Manual HSM2895 GROOMING KIT 14 IN 1
dcg16.it
19
Detail trimmer
1. Attach the detail trimmer.
2. Gently move the groomer to create a variety of shapes you need.
3. It also can trim nose and ear hair but avoid inserting the cutting
unit more than 6mm into your nostril or ear.
Cleaning, Care & Maintenance
NOTE:
Always clean Grooming System attachments regularly to
ensure maximum performance and a proper operating life.
Cleaning attachments with water
Remove attachment.
Rinse ONLY the attachment under warm running water. DO NOT use
hot water ad this might cause damage.
Cleaning attachments with brush
After first removing attachment, thoroughly brush and blow out hair
clippings from cutting system, attachment, and top of power handle.
Cleaning trimmer
(DO NOT rinse nor oil foil shaver attachment as this is permanently
lubricated.)
Rinse the trimmer unit under a hot tap for some time (note:you can
also brush the trimmer unit with cleaning brush supplied.)
Pull the beard head holder off the bottom parts of the trimmer unit
and rinse it under a hot tap for 30 seconds
Carefully shake off excess water and let the trimmer unit dry.(never
dry the trimmer unit with a towel or tissue ,as this may damage the
trimmer heads) Reattach the beard head holder to the bottom of the
trimmer unit (“click”)
Oiling blades &cautions
• Rinsing attachments under water (above) requires lubricating the
cutting blades 1× monthly. Using only light-grade oils (e.g. sewing
machine oil), simply spread 1-2 drops lightly over cutters with
fingertip. Wipe away all excess.
• Use only light-grade oils as these will not evaporate nor slow down
