Instruction Manual HSM2800 PROFESSIONAL BARBER
dcg16.it
15
then plug into a socket. Switch on the product and then use it.
⚫
After using, switch off and then disconnect the adaptor connector with product.
⚫
If the battery has been used out, it may be difficult to start
the product even if it is plugged. You should restart it after
charging at least one or two minutes. while charging, the
product body and the adaptor may be a little hot, however,
it is a normal phenomenon.
⚫
Take the adaptor out from the power socket
⚫
Take the plug out from the product
Please hold the plug and take it out.
Don’t pull the cord in order to avoid any damage for adaptor.
⚫
Don’t charge the product more than 6 hours each time.
8.
The Cutting Head Disassembling & Assembling
Cutting head disassembling
Use another hand to hold the cutting head to prevent it flying out.
Cutting head assembling
1.
Insert A into B.
2.
Turn the size selection control knob into the position of 2.0mm
3.
Press it until a click sound.
As soon as the charging is finished,
take the plug out from the socket.
9.
Cutting Head Cleaning
Repairing Service
⚫
From the date of purchase, you can get one year warranty if our appointed repairman
confirms that the problems or the defects are cause by production process or material.
（
Except for the changes of blade.
）
⚫
This free service doesn’t include the attachment, auxiliary device, transportation charge,
and door-to-door service charge.
⚫
It can only be valid as the date of purchase both in warranty card and purchase voucher
are matched.
⚫
Warranty card and invoice or other purchase voucher should be provided when
repairing.
⚫
The warranty card only can be used in American mainland.
⚫
The warranty card is the evidence of free repairing within specified conditions and
period. But it doesn’t limit the rights of consumers in law.
⚫
Please keep the warranty card well after purchase.
Free repairing service can’t be provided under the following conditions:
⚫
The damage was caused by the repair or reconstruct in the place which isn’t appointed
by our company.
Clean the left hairs in cutting head
Hold the moving blade base and clean the left hairs
Clean the left hairs in product body by brush
Put a drip of oil to each circles
9.
Cutting Head Cleaning
Repairing Service
⚫
From the date of purchase, you can get one year warranty if our appointed repairman
confirms that the problems or the defects are cause by production process or material.
（
Except for the changes of blade.
）
⚫
This free service doesn’t include the attachment, auxiliary device, transportation charge,
and door-to-door service charge.
⚫
It can only be valid as the date of purchase both in warranty card and purchase voucher
are matched.
⚫
Warranty card and invoice or other purchase voucher should be provided when
repairing.
⚫
The warranty card only can be used in American mainland.
⚫
The warranty card is the evidence of free repairing within specified conditions and
period. But it doesn’t limit the rights of consumers in law.
⚫
Please keep the warranty card well after purchase.
Free repairing service can’t be provided under the following conditions:
⚫
The damage was caused by the repair or reconstruct in the place which isn’t appointed
by our company.
Clean the left hairs in cutting head
Hold the moving blade base and clean the left hairs
Clean the left hairs in product body by brush
Put a drip of oil to each circles