Instruction Manual GH06_B GAS HEATER
dcg16.it
23
LIGHTING INSTRUCTION
1. The heater has three settings. Lighting and Minimum(Pos.1);
Medium (Pos.2) and Maximum(Pos.3).
2. Turn on the gas by turning the gas regulator to the on position.
2. LIGHTING:
The heater can be regulated to three different heat intensities
Pos.1,Pos.2,Pos.3.
• Press down and turn the control knob to and hold for 10
seconds.
• Whilst still pressing down the control knob press the ignition button
until the pilot light (at the bottom of the burner) ignites. Continue
to hold the control knob down for 10-15 seconds more. Release
the button if the pilot flame goes out repeat the above operation
3. HEAT SETTINGS
To change from minimum to maximum gently press control button
and turn it position 3. To change from maximum to medium gently
press control button and turn it position 2.
3. Turn off heater at cylinder or turn the switch on the regulator to
the “OFF” position. If the heater is not be used for a period of time
disconnect the regulator from the cylinder and replace any value
protection plug or cover
Attention!
Please do not forcefully turn the control knob, the button should be
pushed down before changing the heat control settings. The control
button will not turn without pushing downwards. Ensure the button
is locked into the heat setting /position required.
