Instruction manual VERI25 AIR COOLER
dcg16.it
17
INSTALLATION
BEFORE FIRST USE
Unpack the device
1. Open the carton and remove the device.
2. Remove the packaging completely from the device.
3. Wrap the power cord completely, being careful not to damage it.
Caster wheels
For easier transport, the device is equipped with caster wheels.
Two wheels are equipped with a parking brake to guarantee a firm footing.
1. After you have carefully unpacked the device, insert the caster
wheels into the notches provided on the underside
of the device.
2. To adjust the parking brakes, operate the levers as follow
DOWN PRESS
➜
Fix the brake
UP PRESS
➜
Release the bra
Remove the transport lock in the water tank
The water pump is fixed to the bottom of the water tank in a safety bracket
which is additionally provided with a safety catch for transport, which you
can remove.
1. Push up the safety bar above the water tank so you can pull out the water
tank.
2. Cut the transport lock located above the water pump and remove it from
the safety bracket. 3.Now, if necessary, you can unscrew the pump from
the holder to pull the water tank completely out of the air cooler.
INSTALLATION
Please note the following points during installation.
1. Place the unit on a level and firm surface and adjust the parking brakes to
ensure that the unit has a firm footing.
2. The distance to walls or other objects must be at least 50 cm.
3. Make sure that both the air inlet and the air outlet are free of obstructions
and not blocked before using the appliance.
4. Connect the device to a grounded power outlet.
