Instruction manual VE1855 MIST FAN
dcg16.it
7
OPERATING FUNCTIONS
1. Misting Outlet
2. Front Rotary
3. Functions Zone
4. Negative Ions Outlet
5. Front Panel
6. Water Level Indicator
7. Base
8. Handle
9. Back Rotary
10. Back Panel
11. Mosquito Repellent Slot
12. Detachable Water Tank
13. Outfall
14. Wheel
METHOD OF USE
1. Before using the fan, please make sure the product is intact, use the same
power supply and voltage as mentioned on the rating label at back side of
the product. Once the product is plugged in, the buzzer will beep once, the
LED display will display in a few seconds later, the power indicator will also
light up and the fan would have entered into standby position.
2. Switch on:
When the fan is stationary, press the “On/Off” button, the buzzer will
beep twice, and the fan will start to work in the weak wind state. You can
then choose the speed mode either by pressing the speed button on the
control panel or on the remote controller.
3. Wind speed adjustment
After switching on the fan, if you want to change the air flow volume, you
can lightly press the “Speed” button on the control panel of Function
Zone to adjust air fan speed. You can choose from Low, Medium and
High. The relative wind circulation can be set from the control operation
on Function Zone panel.
