Instruction manual 13 BLADES STAND FAN WITH TIMER AND REMOTE CONTROL
dcg16.it
12
REMOTE CONTROLLER INSTRUCTION
1. The remote control includes one CR2025 battery. Battery comes
pre-installed.
2. Pull the plastic insulation film out from the backside of the remote
control before first use.
3. The remote control functions are the same as the control panel on
the circulator. Follow the same instructions above to operate the
fan remotely.
4.
Note:
The remote control must be pointed towards the receiver
on the fan in order to work.
5. Please take out the battery for long time no use.
MAINTENANCE AND STORAGE
1. Always unplug the unit before cleaning.
2. To keep the circulator clean, the outer shell may be cleaned with a
soft, damp cloth. You may use a mild detergent if necessary. After
cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let
liquid enter the circulator.
3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish,
or rough brusher to clean the circulator. This may cause damage
or deterioration to the surface of the circulator.
4. DO NOT immerse the circulator in water.
5. Wait until the unit is completely dry before use.
6. Store the circulator in a cool, dry location when not in use. To
prevent dust and dirt build-up, use the original packing to repack
the unit.
TECHNICAL DATA
Rated voltage: 220-240V~
Rated frequency: 50Hz
Power: 55W
