background image

Pin Function For Terminal Block:

 External power supplies are connected using the 

removable terminal block: +Vs: Power input +10 to +30V GND : Ground and F.G.   : 
F.G. stands for Frame Ground (protective ground). It is optional. If you use this pin, it can 
reduce EMI radiation; improve EMI performance and ESD protection. 
 
The power supply ground is floating from the chassis or frame ground. 
 
Power supplies can have a positive or negative ground and the power lead of the opposite 
value or it may have negative and positive power leads. 
 
When wiring the power supply to the unit be sure to put the power supply negative 
ground lead to the middle slot/hole and the positive lead to the +Vs – if the your power 
supply has no ground lead but only + and – put the – to the ground/ middle slot/hole and 
the + to the +Vs. Don’t let the F.G hole/slot confuse you – it’s for Frame grounding 
which is used to reduce EMI radiation; improve EMI performance and ESD protection. 
 
If your unit will be subject to lighting or power surges you can wire the FG to the 
building power ground to help reduce burn outs. 
 
 
 

Отзывы: