Configuration
but can also become a security problem. Disabling ping causes the unit to not respond to ping requests
for one of its IP addresses. It has no effect on the passing of ping request and responses from other
network nodes through it's bridged interfaces.
Accepted Web IP Source Address
This table allows you to control what hosts or networks have access to the configuration web server. If
empty, any host may access the unit.
Entries are made by specifying a Target and Netmask. For example, if you want to allow only the host
192.168.10.16 access, you would enter:
Target: 192.168.10.16 Netmask:255.255.255.255.
If you wanted to allow access to all hosts in the range 192.168.10.1 to 192.168.10.255, you would
enter:
Target: 192.168.10.0 Netmask: 255.255.255.0
Target
Host or Network address.
Netmask
If blank or set to 255.255.255.255, target is assumed to be a host address. Otherwise, target is
treated as a network address.
Notes
Remember to submit the change by clicking the “SUBMIT” button.
Set Clock
Set Clock Screen
This form allows you to set the hardware clock. The setting will take effect immediately.
Fields
Year
Year in the range 2000 to 2035.
17
