![DC-Tri Commuter 2.3 Скачать руководство пользователя страница 28](http://html1.mh-extra.com/html/dc-tri/commuter-2-3/commuter-2-3_owners-manual_516826028.webp)
Assembly Instructions
DC-Tri Commuter 2.3
Product ID:
Remove contents from box. Remove the foam separators that protect the
components from damage during shipping. Because the trike was 95 percent
assembled and packed at the factory, there should not be any problems, even if
the box has a few scars or dents.
M AKE SURE POW ER SW ITCH IS TURNED “OFF” BEFORE
CONDUCTING ANY ASSEM BLY OR M AINTENANCE PROCEDURES.
Estimated Assembly and Set-Up Time
Dc-tri recommends assembly by an adult.
Allow up to 10 minutes for assembly, not including initial charge time.
Allow up to 6 hours for charge
Tools Required
Small adjustable spanner and Allen Key
The DC-Tri should arrive in 3 completed part and only the headset assembly components
require assembly (Front Wheel Assembly, Frame Assembly & Headset Assembly.
Before you begin – Remove Battery and Charger from Box and place on charge (Initial
Charge – 6 Hours) 4-hour charge thereafter if battery is empty.
1.
Remove all parts from the box - check that you have been provided with the
following parts.
Front Wheel Assembly -Front Wheel, Rim, Motor Handlebars (fitted with grips,
controller, handbrake lever, bell & throttle) & Cables
Frame Assembly - Frame complete with floor & rear wheels, Battery Holder Cradle &
Battery
Headset Assembly – Headset, bearing, split ring, cap, spacer, Headset cap M5 x 30 cap
screw
Содержание Commuter 2.3
Страница 30: ...Connect Mainframe ...
Страница 31: ...Handle Bar Connection ...